glaze precision Al2O3 Alumina Ceramic Structural Parts
Reputation depends on quality, quality comes from Hard!
Alumina Ceramic:
Dry pressing: Alumina ceramic dry pressing technology is limited to objects with a simple shape and an inner wall thickness of more than 1 mm and a length to diameter ratio of not more than 4:1. The molding method is uniaxial or bidirectional. The press is available in hydraulic or mechanical form and can be semi-automatic or fully automatic. The maximum pressure of the press is 200Mpa. The output can reach 15 to 50 pieces per minute. Since the hydraulic press has a uniform stroke pressure, the height of the pressed parts is different when the powder filling is different. However, the pressure applied by the mechanical press varies depending on how much the powder is filled, which may cause a difference in dimensional shrinkage after sintering, which affects product quality. Therefore, the uniform distribution of powder particles during dry pressing is very important for mold filling. The accuracy of the filling has a great influence on the dimensional accuracy control of the manufactured Alumina Ceramic Parts. The powder particles have a maximum free-flowing effect of more than 60 μm and between 60 and 200 mesh, and the best pressure forming effect is obtained.
properties: High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600°), good thermal diffusivity, good insulativity, low cost etc.
Data Sheet↓
Color: White/Ivory Density: 3.9g/cm3 Alumina Content: 96% 99% 99.5% Gas permeability: 0 Water Absorption: 0 MONS' Hardness: 82 Vickers Hardness (Hv50): 15.7(1600) Gpa(Kg/mm²) Flexural Strength(20°C): 330Mpa Compressive Strength(20°C): 2000Mpa Fracture Toughness (20°C): 4 MPam1/2 Thermal Conductivity(20°C): 27.5W(m.K) Thermal Expansion Coefficient: 7.6 10-6/°C Thermal Shock Resistance: 200 △T°C
Maximum use temperature 1650°C
Dielectric Strength: >10 KV/mm
Dielectric Constant: 9.1er
Dielectric Loss Angle(1MHz): 0.0002-0.0003
Volume Resistivity(20°C): >1014Ω.cm
Application industry: Machinery, electronic, chemical, petroleum etc. Specific application: Electrical ceramic substrate, plunger, sealing ring etc.
Why Choose Us? 1.12 years of professional production industrial ceramics factory 2.High quality products with low price 3.High precision parts with lowest tolerance 4.Short time for production 5.Has a group of experienced, professional and efficient R&D team 6.Has a good reputation in China and abroad. 7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Products Show
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.