hard high polished Si3N4 Silicon Nitride ceramic long bar rod
Reputation depends on quality, quality comes from Hard!
Silicon Nitride Ceramic:
1.4 Molding conditions The mold temperature is high, the molten material cools slowly, the density is high, and the shrinkage is large. Especially for crystalline materials, the shrinkage is greater due to high crystallinity and large volume changes. The mold temperature distribution is also related to the internal and external cooling and density uniformity of the plastic part, which directly affects the shrinkage and directionality of each part. In addition, holding pressure and time also have a greater impact on contraction. High pressure and long time will result in small contraction but greater directionality. The injection pressure is high, the viscosity difference of the molten material is small, the interlayer shear stress is small, and the elastic rebound after demolding is large, so the shrinkage can also be appropriately reduced. The material temperature is high, the shrinkage is large, but the directionality is small. Therefore, adjusting the mold temperature, pressure, injection speed and cooling time during molding can also appropriately change the shrinkage of the plastic part. When designing the mold, according to the shrinkage range of various plastics, the wall thickness and shape of the plastic part, the size and distribution of the inlet form, the shrinkage rate of each part of the plastic part is determined based on experience, and then the cavity size is calculated. For high-precision plastic parts and when it is difficult to grasp the shrinkage rate, it is generally advisable to use the following methods to design molds: ① Use a smaller shrinkage rate for the outer diameter of the plastic part, and a larger shrinkage rate for the inner diameter to leave room for correction after mold trial. ②The mold trial determines the form, size and molding conditions of the gating system. ③The plastic parts to be post-treated shall be subjected to post-treatment to determine the size change (measurement must be 24 hours after demolding). ④ Correct the mold according to the actual shrinkage. ⑤ Retry the mold and appropriately change the process conditions to slightly modify the shrinkage value to meet the requirements of the plastic part.
properties:
High hardness, high strength, wear resistance, corrosion resistance, high temperature(1200°), good thermal diffusivity, good thermal shock resistance(avoid the temperature changing rapidly), good insulativity, low density. The comprehensive properties are best in most of structure ceramic.
Data Sheet↓
Color: Black Grey
Density: >3.2g/cm3
Hardness: HRA90
Vickers Hardness (Hv50): >1550 HV0.5
Modulus of Elasticity: 290Gpa
Flexural Strength: >600Mpa
Compressive Strength: 2500Mpa
Modulus of Elasticity(25°C): 65Gpa
Fracture toughness:>6.0 Mpam1/2
Maximum Use Temperature: 1200°C
Thermal Conductivity:15-20 W(m.K)
Thermal Expansion Coefficient: >3.1 10-6/°C
Thermal Shock Resistance: 500 △T°C
Special Heat Capacity: 700 KJ/kg.K
Dielectric Strength: 1 KV/mm
Dielectric Constant: er
Volume Resistivity(20°C): 1.0*10(12)Ω.cm
Application industry:
Machinery, electronic, semiconductor, chemical, petroleum, smelt.
Specific application:
Welding shaft, electronic substrate, plunger, nozzle, slide guide, diesel parts, metal molding, shaft wheels etc.
Why Choose Us? 1.12 years of professional production industrial ceramics factory 2.High quality products with low price 3.High precision parts with lowest tolerance 4.Short time for production 5.Has a group of experienced, professional and efficient R&D team 6.Has a good reputation in China and abroad. 7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Products Show
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.