isostatic zirconia drilling ceramic tube bushing
Reputation depends on quality, quality comes from Hard!
Zirocnia Ceramics:
The process of forming the Zirconia Ceramic body into the drying kiln to evaporate the excess water brought by the powder to a specified range is called drying. Its role is to improve the strength of the semi-finished product and meet the strength requirements of the glaze line operation and printing process. Since cracks are prone to occur when water is evaporated, it is critical to control the rate of water evaporation and operation. The main equipment is a drying kiln. Printing process (Polished bricks use cloth inorganic colorants, which are processed (dissolved according to the formula) after printing and printing on the surface of the dried brick blank through flower screen to achieve surface decoration. The amount of water spray after printing, otherwise defects such as shades of yin and yang, blooming, lack of flowers, and color difference are very likely to occur; the main equipment is flower machines, glaze cabinets and auxiliary devices, and some antique tiles will also use roller printing. The bricks that have been decorated on the surface have no physical properties and need to be further improved in physical indicators such as strength. It is calcined at a high temperature (about 1200 ° C). Roller kilns are commonly used for the production of polished bricks, with furnace gas, heavy oil or diesel as fuel. It is a qualitative process of the product. Defects such as deformation, over-burning karst, color difference, falling dirt, secondary deformation, etc. are prone to occur during the production process. The main equipment is a firing kiln.
polishing:
Polishing, as its name implies, is the process of grinding the surface of the semi-finished product calcined by the kiln to make the surface have a certain degree of gloss, and the product is shaped in this process. It needs to control the cutting amount. The amount of cutting depends on the product. The permeation tile is usually about 0.6 mm, and the gloss of the polished product is required to be above 95 degrees.
Defects in production are mainly diagonal lines, flanges, uneven gloss or lack of light, chipping, chipping. In addition to conventional polishing, a soft polishing process has appeared in recent years.
Data Sheet↓
Color: Customized Density: 6.0g/cm3 Zirconia Content: 94.4% Gas permeability: 0 Water Absorption: 0 Crystal Size: 0.5um Rockwell Hardness(45N): 78R45N Vickers Hardness (Load 500g): 11.5(1175)Gpa(Kg/mm²) Flexural Strength(20°C): 800Mpa Compressive Strength(20°C): 2000Mpa
Modulus of Elasticity(20°C): >200Gpa
Fracture Toughness(20°C): 9.0 MPam1/2 Thermal Conductivity(20°C-400°C): 2.5W(m.K) Thermal Expansion Coefficient: 9.6 10-6/°C Thermal Shock Resistance: 250 △T°C
Application industry:
Machinery, fiber optic, knife, medical, food, petroleum etc.
Specific application:
plunger, Ceramic Shaft, fiber optic bushing, stub, grinding, ceramic knife, ceramic slide guide, machined plunger, mobile phone shell, watch case, haircut razor blade etc.
Why Choose Us? 1.12 years of professional production industrial ceramics factory 2.High quality products with low price 3.High precision parts with lowest tolerance 4.Short time for production 5.Has a group of experienced, professional and efficient R&D team 6.Has a good reputation in China and abroad. 7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.