heat sink Alumina Ceramic wafer chip shim customized
Reputation depends on quality, quality comes from Hard!
Alumina Ceramics:
(1) Good processability: The anodized aluminum plate is highly decorative and moderate in hardness. It can be easily bent and formed for continuous high-speed stamping, which is convenient for direct processing into products without complicated surface treatment, which greatly shortens the product production cycle and Reduce product production costs.
(2) Good weather resistance: the standard thickness oxide film (3μm) of the anodized aluminum plate is used for long-term non-discoloration, no corrosion, no oxidation, no rust. The anodized aluminum plate with thick oxide film (10μm) can be used outdoors. Can be exposed to the sun for a long time without discoloration.
(3) Strong metal feeling: The surface of the anodized aluminum plate has high hardness, gem-grade, good scratch resistance, no paint coverage on the surface, retaining the metallic color of the aluminum plate, highlighting the modern metallic sense, improving the product grade and added value.
(4) High fire resistance: pure metal products, no paint and any chemical substances on the surface, 600 ° high temperature does not burn, does not produce toxic gases, meets fire protection and environmental protection requirements.
(5) Strong anti-fouling: no fingerprints, there will be traces of stains, easy to clean, no corrosion spots.
(6) Strong applicability: Wide application, suitable for metal aluminum ceiling, curtain wall aluminum plate, aluminum plastic panel, fireproof board, honeycomb aluminum board, aluminum veneer, electrical panel, cabinet panel, furniture panel, etc.
The alumina version used to make aluminum plates is bought by the sign factory, and it is oxidized according to the color requirements of the product.
As an aluminum plate that accepts oxidation, the purer the better. For many years, Shenyang's aluminum plate is the best, but it is not easy to buy.
It can also be used with other aluminum products or aluminum alloys.The color that alumina board can achieve is the most oxidized coloring of metal, and it can have an infinite number of colors.It can be used with DC or AC current.AC oxidation with sulfuric acid.Direct oxidation of sulfuric acid and less than 20 grams of aluminum ions per liter.Equipment and materials are mainly power equipment, sand blasting equipment, water-cooled air compressor, oxidation tank, plate and pre-treatment liquid and oxidation solution, etc.. About 1-3 million.
In the copper plate "price" continues to increase, stainless steel etching "black" problem is serious, titanium gold "except titanium" method is not popular now and in the future, Dashang aluminum brand, the trend has been shown.
After surface treatment, the aluminum plate can almost completely achieve the surface effects of copper, stainless steel, titanium, iron, zinc plate, and, like aluminum plate sandblasting oxidation, infinite rotation, swirling, its magical effect, other metals Hard to reach, but its price is relatively low.
properties: High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600°), good thermal diffusivity, good insulativity, low cost etc.
Data Sheet↓
Color: White/Ivory Density: 3.9g/cm3 Alumina Content: 96% 99% 99.5% Gas permeability: 0 Water Absorption: 0 MONS' Hardness: 82 Vickers Hardness (Hv50): 15.7(1600) Gpa(Kg/mm²) Flexural Strength(20°C): 330Mpa Compressive Strength(20°C): 2000Mpa Fracture Toughness (20°C): 4 MPam1/2 Thermal Conductivity(20°C): 27.5W(m.K) Thermal Expansion Coefficient: 7.6 10-6/°C Thermal Shock Resistance: 200 △T°C
Maximum use temperature 1650°C
Dielectric Strength: >10 KV/mm
Dielectric Constant: 9.1er
Dielectric Loss Angle(1MHz): 0.0002-0.0003
Volume Resistivity(20°C): >1014Ω.cm
Application industry: Machinery, electronic, chemical, petroleum etc. Specific application: Electrical ceramic substrate, plunger, sealing ring etc.
Why Choose Us? 1.12 years of professional production industrial ceramics factory 2.High quality products with low price 3.High precision parts with lowest tolerance 4.Short time for production 5.Has a group of experienced, professional and efficient R&D team 6.Has a good reputation in China and abroad. 7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Products Show
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.