high temperature insulating Alumina Ceramic cap bush
Reputation depends on quality, quality comes from Hard!
Alumina Ceramics:
The production process of grouting is composed of the above 9 processes, among which: eating pulp is the process of the mold adsorbing the moisture in the mud to form a green body. Putting slurry, also known as empty slurry, is to discharge excess mud when the green body has a certain thickness. The returned slurry is returned to the slurry tank (or tank). The methods of slurry return are: (1) artificial end barrel slurry: (2) natural pressure slurry, using the slope of the pipeline to return the slurry to the slurry tank; 3) Use the mud pump to pump back the remaining slurry: (4) Negative pressure back to the slurry, that is, the negative pressure formed by the vacuum pump is used to pump the mud back to the mud tank. Except for the first type, they all belong to pipeline backfilling. Consolidation: The green body is very soft after being put out, and it can not be immediately demolded. It takes a period of time to continue to drain the green body and increase its strength. This period of time is called consolidation. One of the main processes of pulp forming, its duration is about half of the pulping time. During the consolidation process, because the model continues to absorb water, the water content of the green body continues to decrease, and the green body gradually shrinks due to the drainage of water. When the water content of the green body When it drops to about 19-20% (that is, the demolding point), the consolidation process ends, and the green body is easily removed from the model at this time. Take the mountain. Demolding: The process of removing the rough billet from the model. Mastering the demolding point is a key. Premature demolding is not enough, the strength of the billet is not enough, demolding is difficult, and the blank is easy to collapse after demolding. Late, the green body will crack. Stick repair: including one-time repair, punching and bonding. The traditional grouting method, the inner and outer surfaces of the blank after the demoulding are rough. Generally, multiple repairs are required, and the sticky The workload is also very large.
properties: High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600°), good thermal diffusivity, good insulativity, low cost etc.
Data Sheet↓
Color: White/Ivory Density: 3.9g/cm3 Alumina Content: 96% 99% 99.5% Gas permeability: 0 Water Absorption: 0 MONS' Hardness: 82 Vickers Hardness (Hv50): 15.7(1600) Gpa(Kg/mm²) Flexural Strength(20°C): 330Mpa Compressive Strength(20°C): 2000Mpa Fracture Toughness (20°C): 4 MPam1/2 Thermal Conductivity(20°C): 27.5W(m.K) Thermal Expansion Coefficient: 7.6 10-6/°C Thermal Shock Resistance: 200 △T°C
Maximum use temperature 1650°C
Dielectric Strength: >10 KV/mm
Dielectric Constant: 9.1er
Dielectric Loss Angle(1MHz): 0.0002-0.0003
Volume Resistivity(20°C): >1014Ω.cm
Application industry: Machinery, electronic, chemical, petroleum etc. Specific application: Electrical ceramic substrate, plunger, sealing ring etc.
Why Choose Us? 1.12 years of professional production industrial ceramics factory 2.High quality products with low price 3.High precision parts with lowest tolerance 4.Short time for production 5.Has a group of experienced, professional and efficient R&D team 6.Has a good reputation in China and abroad. 7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Products Show
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.