wear resistance 99% aluminum oxide ceramic sleeve bush
Reputation depends on quality, quality comes from Hard!
Alumina Ceramics:
In the traditional pouring method, the pre-drying of the green body is naturally dried in the grouting workshop. Within 16 hours after the workers are off work, the high temperature (33-40 ° C) and high humidity (40% -60 %) To make the body dry slowly. After pre-drying, the moisture content of the wet body is reduced from 15% to 17% to 8% to 10%. Care must be taken to prevent waste due to excessive drying or uneven drying. The modern grouting method generally uses hot air to directly force the billet to dry. The pre-drying shrinkage of the vitrified porcelain body is 4% and the pre-drying shrinkage of the clay body is 2%. The final process of grouting will ultimately determine the size of the green body. When the green body is repaired, the water content of the green body should be less, and the water used for brushing the green body should not be oily. After the green body is repaired, it should be stored at 28-35 ° C. Indoor, ready for glazing. 2 Points during the grouting operation (1) When grouting, wipe the mud on the model. Mix into the mud and avoid defects on the surface of the green body.
properties: High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600°), good thermal diffusivity, good insulativity, low cost etc.
Data Sheet↓
Color: White/Ivory Density: 3.9g/cm3 Alumina Content: 96% 99% 99.5% Gas permeability: 0 Water Absorption: 0 MONS' Hardness: 82 Vickers Hardness (Hv50): 15.7(1600) Gpa(Kg/mm²) Flexural Strength(20°C): 330Mpa Compressive Strength(20°C): 2000Mpa Fracture Toughness (20°C): 4 MPam1/2 Thermal Conductivity(20°C): 27.5W(m.K) Thermal Expansion Coefficient: 7.6 10-6/°C Thermal Shock Resistance: 200 △T°C
Maximum use temperature 1650°C
Dielectric Strength: >10 KV/mm
Dielectric Constant: 9.1er
Dielectric Loss Angle(1MHz): 0.0002-0.0003
Volume Resistivity(20°C): >1014Ω.cm
Application industry: Machinery, electronic, chemical, petroleum etc. Specific application: Electrical ceramic substrate, plunger, sealing ring etc.
Why Choose Us? 1.12 years of professional production industrial ceramics factory 2.High quality products with low price 3.High precision parts with lowest tolerance 4.Short time for production 5.Has a group of experienced, professional and efficient R&D team 6.Has a good reputation in China and abroad. 7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Products Show
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.